Oil Expellers



VIP MK II Long Cage Oil Expeller



Brief Outstanding Features

All Steel Fabrication
For perfect alignment and stability.

Vertical Hinged 72” Long Pressing Box
Entirely eliminates the difficult task of removing box for relining or for replacement of worms, which saves lot of time and labour.

The main Shaft
Of the Expeller is water cooled and is of alloy steel construction, fitted with High Pressure Worms hard faced with a highly wear resistant alloy. The worm arrangement has been designed to expel the maximum recoverable oil from oil bearing materials.

Shaft Withdrawal
The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way and pressure worms and spacing collars can be changed without disturbing the shaft. The thrust of the pressure worms is taken upon large Spherical Roller Thrust Bearings.

Compressor
The feeding hopper has a vertical feed device, which compacts the seed coming from the heating kettle, and press it uniformly into the cage.

The Cake at the Discharge
End of the main cage is controlled by manually operated arrangement, which is so simple that the choke gear is independent of the main drive and there is no possibility of a sudden load being placed on Expeller motor.

An Oil & Cake Discharge Conveyor
Is fitted along the full length of the Expeller having right and left hand flights to deliver the oil and cake to central points. The drive is from the main Gear Box.

Power
The power required to drive the “UMAS” VIP MK II LONG CAGE OIL EXPELLER is 100 HP.

Gear Box & Lubrication
A triple helical gear unit made from most suitable special steel, running in Oil Bath. All shafts run on antifriction bearings. Drive housing is oil tight and dust proof, totally enclosed design and is fitted with level indicator. A self contained lubrication arrangement has been provided.

Capacity
The crushing capacity of “UMAS” VIP Long Cage Oil Expeller is 25/30 M/Tons in 24 hours in single pressing with minimum oil contents of 5 to 8% approximately left in oil cake depending on materials being crushed and the working conditions.

Steel Structure for Cooker and Motor Control Cabinet
Are provided as standard accessories.






CONTACT US
Regd. Office:
D-58, 2nd Floor,
Okhla Industrial Area, Phase-1,
New Delhi - 110020 (INDIA)
Phone: +91-11-26371201 / 26371202 / 26371203
Fax:     +91-11-26371200

General : umas@vsnl.com
Mr. L.K. Gandhi : lkg@umas-india.com
Mr. Ashish Gandhi : ash@umas-india.com

2008 United Oil Mill Machinery & Spares Private Limited. - All Rights Reserved.