Oil Expellers



Mechanical Screw Presses ( Oil Expellers ) are commonly used for extraction of oil from various oil seeds, nuts, beans etc. either for full press or pre-press. Full press extraction screw presses / expellers are generally used by small and medium capacity oil mill plants while pre press extraction with solvent extraction process is generally used by large capacity plants.

UMAS offers equipment and systems for full press and pre-press oil mill plants. Maximum oil is removed in full press process (using Oil Expellers) leaving the cake with about 5-8 % oil content. For the solvent extraction process, the preparation process is almost the same as that for full press process with the difference that the pressed material shall contain residual oil in the range of 15-20%. Such material is fed into the solvent extraction plant where the remaining oil is reduced to 0.5 to 1.5% depending on various factors.

'UMAS' VIP MK-5A Oil Expeller

Capacity 50-60 TPD in single press and 125-150 TPD in pre-press.

'UMAS' VIP MK-5A Oil Expeller, all steel fabricated, with improved triple reduction helical gear box with self lubrication arrangement, vertical hinged cast steel chamber, self contained conveyor for oil, alloy steel water cooled main worm shaft, fitted with hard faced worm assembly.

'UMAS' 5-stage Steam Cooker, fitted with vertical gear box and independent motorized blower for aspiration.
'UMAS' VIP MK-5A Oil Expeller






'UMAS' VIP MK-5 Oil Expeller

Capacity 50-60 TPD in single press and 125-150 TPD in pre-press.

'UMAS' VIP MK-5 Oil Expeller, all steel fabricated, with triple reduction helical gear box with self lubrication arrangement, vertical hinged cast steel chamber, self contained conveyor for oil, alloy steel water cooled main worm shaft, fitted with hard faced worm assembly.

'UMAS' 5-stage Steam Cooker, fitted with vertical gear box and independent motorized blower for aspiration.
UMAS' VIP MK-5 Oil Expeller





'UMAS' VIP MK-II Oil Expeller

Capacity 25-30 TPD in single press and 50-60 TPD in pre-press.

'UMAS VIP MK-II Expeller, all steel fabricated, with main cage in two sections. alloy steel water cooled main worm shaft, triple reduction helical gear box with self lubrication arrangement.

 

'UMAS' 4-stage steam cooker for the above, individual drive, fitted with suitable Gear Box.

'UMAS' VIP MK-II Oil Expeller







'UMAS' ASHOKA MK-4 Automatic Oil Expeller

Capacity 12-15 TPD in single pressing.

'UMAS' ASHOKA MK-4 Automatic Oil Expeller, all steel construction, with improved double reduction helical gear box and special design cast steel chamber with 3 high Steam Cooker.

'UMAS' ASHOKA MK-4 Automatic Oil Expeller








'UMAS' ASHOKA MK-3 Automatic Oil Expeller

Capacity 12-15 TPD in single pressing.

'UMAS' ASHOKA MK-3 Automatic Oil Expeller, all steel construction with double reduction helical gear box with 3 high Steam Cooker.

'UMAS' ASHOKA MK-3 Automatic Oil Expeller










'UMAS' EXCEOIL MK 2 Automatic Oil Expeller

Capacity 6-8 TPD in single pressing.

'UMAS' EXCEOIL MK 2 Automatic Oil Expeller, all steel construction with double reduction helical gear box with Feeding Kettle / Steam Cooker.

'UMAS' EXCEOIL MK 2 Automatic Oil Expeller








'UMAS' TIGER MK II Oil Expeller

Capacity: 3-4 TPD in single press.

'UMAS' TIGER MK II Oil Expeller, all steel construction, fitted with steel gears and pinions, with Feeding Kettle / Steam Cooker.

'UMAS' TIGER MK II Oil Expeller








'UMAS' TIGER MK-I Oil Expeller

Capacity 2-3 TPD in single press.

'UMAS' TIGER MK-I Oil Expeller, all steel construction, fitted with steel gears and pinions, with Feeding Kettle / Steam Cooker.

'UMAS' TIGER MK-I Oil Expeller









'UMAS' WOLF MK-I Oil Expeller

Capacity 1 TPD in single press.

'UMAS' WOLF MK-I Oil Expeller, all steel fabricated, fitted with steel gears and pinions, with Feeding Kettle / Steam Cooker.

'UMAS' WOLF MK-I Oil Expeller







'UMAS' Cooker / Kettle


Cookers / Heating Kettles are used for proper heating and conditioning of the oil seeds prior to expelling. Controlled heat and moisture open up the oil bearing cells for maximum oil yield.

UMAS' Cooker / Kettle















'UMAS' Worm Puller


A unique device for removing/replacing Worms and Collars from the Expeller Shaft. Different sizes of Worm Pullers available for different brands and capacities of Expellers. All hydraulically operated.










'UMAS' Spares


SPARES
Besides manufacturing spares for their own machinery / equipment, UMAS also manufacture spares for other popular brands of oil mill machinery and its clients are fully satisfied with the quality and performance of the products.




'UMAS' Old Models


'UMAS' Old Models
CONTACT US
Regd. Office:
D-58, 2nd Floor,
Okhla Industrial Area, Phase-1,
New Delhi - 110020 (INDIA)
Phone: +91-11-26371201 / 26371202 / 26371203
Fax:     +91-11-26371200

General : umas@vsnl.com
Mr. L.K. Gandhi : lkg@umas-india.com
Mr. Ashish Gandhi : ash@umas-india.com

2008 United Oil Mill Machinery & Spares Private Limited. - All Rights Reserved.